TLR – Foxes Den

Halina A1 Reflex – New Leatherette

Today I watched a program on TV and a guy actually restored an old camera, he fitted some new leather to an old Kodak camera and it seemed relatively easy. Now I always try to do things the difficult way and look for perfection in every thing I do, that’s my down fall at times as I can sometimes set my personal barriers too high. Perfect is good but not always achievable, sometimes you just have to do your best, what more can someone ask of you?

What I’m getting at here is that this is a task I have been putting off, putting more time into planning what I’m going to do rather than just getting on with it. As I’ve stated a number of times on this blog, you only learn by your mistakes and as this is my first time doing this task, I’m just going to do my best and learn – knowledge is king 👑

After removing each old worn piece of leather, I made a template. Using a glue stick I was able to position the templates on the leatherette trace around it and then cut out using a craft knife and scissors.

I shouldn’t have worried as the whole process went really well, the leatherette was easy to manipulate and cut well. The one learning point is that in the future I will source a punch to do the circular pieces that went on the external wheels as it’s a bit cumbersome trying to cut perfect circles with scissors, though not impossible.

I am really pleased with the new leatherette, it’s totally changed the look of the camera. The fact it is clean and lenses are functional and shutter works as it should is testament to the hard work I’ve put into this camera. I plan to run a film through it shortly as I do have a couple in the fridge at home for this purpose.

Today I’m looking at cleaning the case and polishing it up. I doubt I will do much more than that and then I can put this project to bed. Once the case is done I will put final pictures up here on the site.

A quick run through….

Once again thanks for dropping by. You know it’s greatly appreciated 🙏

Halina A1 Reflex rear door repair and new light seal

Just a couple of little jobs tonight.

The loose hinge on the rear door has tonight had a two part epoxy resin glue put on it and is clamped for the next two hours to ensure it is sufficiently secured for usage. Fingers crossed this should work.

Also the original light seal on this camera was simply string. It was black originally but seeing I have no black available and in the interest of recycling what I already have I have replaced, in keeping with the original design like for like. Yep it’s red but it’s not going to be seen anyway, is more than up to the job and the new skin will have red on it anyway so it will be complimentary in that aspect of the renewal.

I don’t have anymore to do tonight, if this all works out well and the hinge is sufficiently strong enough then I can start reskinning and reassembly.

Thanks for popping by, always appreciated 👍

Halina A1 Reflex fungus clean

So tonight I have brought my smallest set of screwdrivers and other tools in to work to continue work on the old Halina project I have been immersed in. Tonight between jobs I intend to deal with the fungus issue on the taking lens.

I have previously removed the camera faceplate and the two lenses are connected to this. On the rear of the faceplate is a brass connector that when removed allows you into the back of the taking lens into the shutter curtain and aperture curtain.

This allowed me to dry clean as such both curtains and I used a little graphite dust (tiny tiny proportion) to lubricate both curtains and finally after many years allowing the shutter to work as it should. A good blow with some compressed air dealt with any remaining dust.

With the setting on “B” I was able to access the lens element in front of the curtain, this was cleaned with a 50/50 mix of peroxide and distilled water to remove the offending fungus. I allowed this to dry and lightly polished the element with a cotton bud when dried. Again compressed air was used to finish.

I repeated the above for the other two elements of the lens (this is a three element lens) and then did the same with the viewing lens.

When reassembling it’s important to ensure the elements are fully dry. The elements were all wiped over before reassembly and given a last blow prior to being resealed and checked with a bright light.

Fungus removed from Halina A1 Reflex

This was the job I was most concerned with but thankfully it went well and I am pleased with the outcome. The fungus issue has now been eradicated and hopefully it will stay away. Just a couple of little jobs to do now prior to reassembly of the camera and we can then put the new leatherette on the body.

Thanks for passing by, always appreciated 👍

Halina A1 Reflex paint touch up

Working tonight, and between jobs I’ve managed to do a few of those little tedious jobs that still need to be done on this camera.

I’ve cleaned pretty much all the parts again, used some isopropyl to really get the old ingrained dirt away and have retouched with either a gloss or Matt paint depending on what part of the camera needed touching up.

I’ve also replaced some light seal and still have a bit to do on the roll film door. I’ve also reassembled the mirror assembly after each little part of it has been thoroughly cleaned.

The smell of age that has always been an issue with this camera continues, however I have had a bit of a breakthrough today with the camera itself, it’s a strange one but it seems to work. Once the painting has been done I’ve used a cloth soaked in black shoe Polish to coat all metal areas of the body. Once this dries I buff up with a dry cloth and hey presto not only does the retouched paintwork come up lovely it now has a polished smell that has taken the dank smell away from the bodywork. Hopefully fingers crossed this can be used to combat the years of damp smell that has accumulated on this piece.

Finally I have taken every shiny piece including screws and cleaned these as well, I must say the cleaning works and these parts have all come up lovely.

The case still needs attention, I’m fighting years of damp and staleness with that and hopefully will have an acceptable solution for it soon.

I still have to get into the lens and sort the fungus issue out, there is a hinge on the roll door that needs fixing and I then need to use the templates I created last week to cut out the new leatherette for the camera. Still a small amount to do, but I hope to be able to reassemble very soon.

Have a lovely day and thank you for passing by.

Halina A1 Reflex focus glass clean & other issues

Just an update of what’s going on with the old Halina TLR.

Today I have tinkered with the ground focus screen, and hood and related springs and hinges. the majority are fine but I’ve found a hinge on the rear door that has a broken weld on one side, I discovered this as I began to clean the old light seal around the back door prior to putting some fresh seal in place. I’ve stopped at seeing this as I am going to put a repair in place so as not to stress the other side of the hinge that seems to be holding. Another head scratching moment whilst I seek a solution.

The focus screen required me to remove a couple of 60 year old springs, this went well, they are ok and I’ve cleaned them as well. The ground glass screen has been cleaned as well as all surrounding metalwork and hinges and all looks good. All went back together with no real issues.

Just preparing for cutting the new leatherette for the camera, today I have just made some templates and measurements for the eight pieces that need to be cut for this camera.

Stage one of ridding the case of the dank musky smell has begun today. It’s sitting in the sunniest place I can find on a shelf at work, and in a week or so I will be placing it in an airtight bag with some silica gel packets and some suggested fragrance for a further couple of weeks to see what happens.

Currently still awaiting the right time to open the lens up and start removal of that lens fungus.

Work continues…..

Halina A1 Reflex dismantled

Yes. You are right the picture is of a chocolate box and not an old camera. However today in a quieter period I have dismantled in it’s entirety the Halina A1 Reflex camera – the smelly one that’s right 👍

The lovely thing about this camera is that it is easy to dismantle right down to its original body shell as most of the parts are held together by screws and not rivets. This has allowed me a lovely scope for putting new leatherette on the body as I’ve been able to move all winders, locks and strap holders giving me a naked body as such to work on.

However the old leather has been kept to be used as templates for the new skin that will be attached. Firstly though it’s clean, clean, clean to remove the old adhesive and to replace some light seal within that is literally just two black pieces of string, I will upgrade this with some new up to date light seal though. I will clean everything removed today and only then will I attempt reassembly.

The lens assembly is going to have to be opened and recalibrated as I need to get inside to treat that fungus that was reported in earlier posts.

I have damaged a couple of small screws here that I will need to replace, couldn’t be helped as they’ve probably not moved since the day the camera was assembled. Nice to be able to do this project in small chunks due to the ease of disassembly. May need to get another sheet of leatherette as the sheet I have may not be sufficient for this task.

Only problem is still the stale old smelling case…but I’m looking into it and will share what I do with it at a later date.

Halina A1 Reflex shutter and Fungus

Managed to get the shutter firing after a while of blasting with compressed air and constantly cocking and firing the mechanism until it clicked into life. Probably stiff due to not being used for a number of years and left in storage. When I get the unit apart I will help it along with a little clock oil.

When shining a light through the back of the camera with the shutter open the fungus issue on the lens is most apparent, this is a three part lens I believe so it’s going to take some time and patience to achieve, but it’s do able, but it will have to wait a while.

Shine a light for all to see…..fungus

So I’ll leave you with this for today, the smell of years of dampness invades when ever I get this camera out of its box and to be honest I think that will be my biggest challenge with this unit. Any ideas and tips on how to assist with this problem gratefully accepted 👍

Halina A1 Reflex Assessment

Received the Halina today and on assessment I’m a tad disappointed but have learnt a valuable lesson. I purchased on line and it seems the positives have been promoted and the negatives omitted completely.

Positives:

It’s all there
The case is in great condition for its age
Leather strap is original
Aperture lever and aperture mechanism works
Viewfinder is good (needs a clean)
Cassette box is fine
No dents and dinks

Negatives:

It smells horribly dank, I suspect it hasn’t spent time in a cupboard, probably in a loft space
Hence the lens has signs of fungal occurrence
The original skin is peeling off
The shutter is not working
Light seal has rotted all around

Now I payed over the odds for this, to be fair I purchased it from a charity hospice so I don’t begrudge the outlay due to the cracking work that they do. It’s just I have learnt to ask more questions and don’t take the auction description as gospel….lesson learned.

Looking on the bright side all the negatives can soon be turned to positives, it’s going to require some work on parts I’ve never worked on before but isn’t this the best way to learn? On a low cost item that’s not going to impact anyone in any way, and at the end I should have a perfectly usable camera to either keep or move on.

So. What am I going to do? This unit is quite easy to dismantle as it has screws and not rivets, a positive in my eyes so I will dismantle the unit completely, service, clean and reassemble. But first I’m going to leave the whole package out in the fresh air on a window seal for a week or two to let the sun get to the lens so I can probably stop the fungus spreading further, and hopefully I can stop the stale smell getting worse. I will look at refreshing the leather to help here. Cleaning through all stages will hopefully help to ensure this.

I’ve decided to replace the light seal and lubricate all the moving parts, I’m going to replace all the leather with a snazzy red snakeskin leatherette to breathe new life into this old girl.

I’m looking forward to getting this one working, I’ve got the film to run through it, I now just need the time to get the work done, and this is going to take a little time to achieve, I currently have so many cameras to work on I’ve got to stop buying more 😂

And that’s harder than you’d think…..

Halina A1 Reflex

I’ve managed to obtain yet another old TLR camera, i paid a little more for this example as it was from a hospice so I’m not worried about the extra expense, as it is in a very good condition. I will just have to wait until it’s in my hands to know for sure. Originally made in Hong Kong by Haking, the A1 was one of their better produced cameras. Again very pleasing to the eye.

Here is some history on this camera, I will cite the reference at the end:

Type: Twin lens reflex camera for film rolls
Manufacturer: Haking
Year of launch: Circa 1960
Film: type 120 film rolls
Lenses: Halina Anastigmat 1:3.5 F=80mm C lens geared to Halina Viewer 1:3.5 F=80mm C lens
Shutter: two-blade shutter with speeds B, 1/25, 1/50, and 1/100 sec., selectable with thumb-wheel around lens
Cocking: moving the shutter release lever a little bit upwards
Aperture: lever below lens, 1:3.5 to 1:22 selectable
Focusing: using one of the gear wheels that synchronize Viewfinder and camera focus as thumb wheel
Viewfinder: collapsible TLR finder with ground glass screen, and hinged magnifier for optional usage
Film advance: thumb wheel, closeable exposure counting windows on the back
Specialty 1: leather case has two sheet metal tongues to fix the camera
Specialty 2: the shutter of the lower exposure counter window bears the imprint Empire made (=British Hong-Kong)
Connector 1: connection thread for remote shutter release
Connector 2: flash connector
Connector 3: connection thread for tripod

Information on camera obtained from Camera-Wiki.org

I will update on my intensions for this camera once it is in my possession. Check back for further updates.

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this: