Capacitor plague

What the heck is that?

Blown capacitors

Photo copyright : Wikimedia Commons

For many this is old news and pretty much everyone involved in electronics is aware of this problem that swept through the industry in the mid to late 2000s. Chances are you may have such a unit in your home that has either luckily survived the issue to still be working, or may well be not working and assigned to that part of the house (Normally the loft) where it left until the day you move premises and visit the local tip.

Those of us that number a great many who like to tinker and repair old machines and equipment from this era are still seeing the back end of this issue to this day, its fairly easy to deal with and those that especially work with old computer motherboards and graphics card notice issues the most, its an interesting back story and ill try to cover it as best as i can in this post.

What is a capacitor?

  • A capacitor is a device that stores electrical energy by accumulating electrical charges on two closely spaced surfaces that are insulated from each other. It is like a little battery but thats where the similarities end, as a capacitor distributes energy in short bursts rather than a battery that is distributing power linearly. Originally known as the condenser, the capacitor is used within a circuit to add capacitance to that circuit.
  • Capacitance is the ability of a component to store an electrical charge – (Simple version)

What was the issue?

  • The issue was with Electrolytic capacitors produced between 1999 and 2007
  • The origins of the issue was with the use of water based electrolytes developed during the late 90s. These capacitors using this type of electrolyte were found to be exceptional components when used in power supply circuits. The problem was that the water based caps produced aluminium oxide when reacting with the capacitor “Can” and that reaction was Hydrogen. The Hydrogen built up until the stamped vent on the top broke. Resulting in a failure within the circuit.

It was only in the mid 2000s when the plague really set in, some of these capacitors would have had hundreds of thousands of hours of use and even though they would have passed initial testing protocols they were doomed to fail, and that just so happened to be in the mid 2000s.

The Blame game

It was around this time with exceptional failure rates on certain items and claims being raised against major players in the electronics industry that deeper investigation took place.

Findings

  • The cause of the failures was due to a mis-copied formula, in 2001 a scientist working for a major corporation that made these type of capacitors stole a mis-copied formula for the capacitors electrolytes. He then took this faulty formula to another company. That same year the scientists staff where he previously was employed left that company, again with the stolen formula and started their own company in Taiwan producing immense amounts of faulty capacitor electrolytes.
  • No one was ever really brought to justice for the failures, no one company ever really came clean over the issue, the tech companies tended to absorb the cost of repairs and the end result was probably that the consumer paid in the long run…nothing changes there then!

When this started to occur, many individuals in the industry jumped on the band wagon to repair these items, many selling capacitor kits for certain brands to allow those who were willing, to make their own repairs.

Today the issue still occurs but it is not so prevalent, older circuitry does still throw up some classic blown capacitors and these are fairly simple to replace, some smell quite fishy as well, so sometimes a good sniff of a circuit board can alert you to a blown capacitor…very strange!

Thoughts 4/3/24

Describe a phase in life that was difficult to say goodbye to.

I had always been a fit and active individual, taking in part in any challenge that came my way. I used to set myself physical challenges that I’d always throw myself into without any fear or concern for injury. However come the mid fifties of my life and aspects of my health changed immensely. I began feeling pains and symptoms I’d never felt before and have had to accept since then that my mind is issuing cheques that my body can no longer cash.

Yes my mind is active but age has meant I am now having to say good bye to the health I once enjoyed.

It’s like being asked to leave a party when you are just starting to enjoy it…

Stay young if you can, enjoy life. Peace to you all.

Thoughts 3/3/24

What are three objects you couldn’t live without?

I live with my wife and dog. I do not wish to objectify or itemise them as they do not deserve that, they deserve an immense amount of love and respect, I’m just putting it out there that they are all I need in my life and have been for many years.

However as I dutifully have to make a choice or three here we go.

  • Medication 💊 without the two that I currently take (I won’t go in to detail) I guess it would be game over so to be honest this is probably the most relevant
  • Books 📕 my constant thirst for knowledge and learning means that this object slots comfortably into second place. As I’m a child of the sixties it’s books over Internet all day long, as the internet didn’t exist then, fast forward 3 decades and my choice if I’d been born in a different era might be slightly different.
  • Camera 📷 what better way to remember all those wonderful places, people and memories you have created along the way. Whether using the old film cameras of my generation or the new fandango units and phones of today, how else are you going to peek into time gone by and put a smile back on your face.

Yep, I’m happy with that, had to think a bit but these are the three items I could not live without.

Be happy my friends, peace to you all.

Thoughts 2/3/24

What experiences in life helped you grow the most?

My father was a demon. Consumed with jealousy towards my mother she couldn’t speak to anyone without being questioned about her motives. Most of my formative years were spent as a youngster protecting her and my younger sister from his rage. Going to bed at night as a young teenager with a metal bar under the covers to be ready to go at him should he fly into another of his rage’s leaves a scar on my memory to this day, almost 40 years later.

I always stated that I would never be like him, and all these years later I think I’ve done ok. My life is better than his, I have achieved more than him and I have never raised my hand to anyone especially a female in my entire life, so in theory I think I have won.

He still haunts me in my dreams though and it is as if I am still being challenged by him even though he is no longer here.

I’ve grown from this experience, no child should ever have to suffer this amount of emotional abuse, no female should ever have to live through that constant fear of an abusive partner. No man should ever be capable of such coercion.

But it happens.

Just not in my life anymore… I’ve grown.

Stay smiling, you are a beautiful person who deserves happiness.

Thoughts 1/3/24

Do you believe in fate/destiny?

I believe you shape your destiny and fate. Nothing too complex, don’t read too much into it, if you are nice and polite to people, you will get the same in return. Opportunities will surface due to your attitude so take what is presented to you as a result.

Yes, attitude shapes fate and destiny.

Roberts Blutune T2 breakdown and fault finding

The radio has been received see here: Not just Dead….Fully dead and if I can’t get it going, I have at least brought a very tidy storage box.

What surprised me when first opening up this radio was the immense amount of boards and circuitry inside, I must admit I took a gulp at this and questioned my reasoning for purchasing the item. However it’s all a learning curve and I have to start somewhere, gone are the days of simple circuits on traditional radios (with big components).

I arrived home from work and sat myself down in the conservatory surrounded by test devices for about 4 hrs until I totally overloaded my self with information, creating more questions than answers, i decided to give up for the day and further research the potential faults for this unit via other sources.

To me the power board seems fine, power is going where it should, there appears to be no short circuits or component damage however in places there does seem to be some signs of leakage so I may have some components that need replacing or maybe it’s just remnants of flux and stuff left behind after initial construction.

None of this can be seen by the naked eye but it becomes apparent after being placed under my new toy an Andonstar microscope viewer. It’s at the entry end of the range but it is already becoming a game changer for me, due to my failing eyesight.

Andonstar AD106S

Copyright Andonstar

Further investigation appears to highlight an inherent issue with this range of radios when they just seem to stop working (probably why Roberts ceased production).

Generally the power board isn’t an issue, it all focuses around the display board where a controller to the screen has failed or the amplifier chip has failed, hooray I say! And then I find out both components are about the size of a grain of rice… Boo I say.

I have no experience at all in components this minuscule in size, but if I can’t get to the root cause and eliminate all other possibilities I will give it a go. In the meantime fault finding will go on between other jobs and this will continue to be a job in progress that will be revisited and updated as time goes by.

The plan short term is that I’m going to borrow a thermal camera and check if there are any hotspots under electrical load. You never know I might just find something.

I shall comeback to this project at a later date.

Thanks for passing by. Stay safe, be superb. You’re a star 🌟