Tag: battery contamination

What the listing stated:

The Vintage Monopoly Electronic Handheld Game from Hasbro (1999) is a classic electronic game that allows players to enjoy the iconic Monopoly game on the go. With its handheld design, this game is suitable for players aged 4 years and above, making it a fun and engaging activity for children and adults alike. Although untested, this nostalgic piece of gaming history is sure to bring hours of entertainment to anyone who enjoys the challenge of a good game of Monopoly.

EBay.

The good old EBay get out of jail free card (How appropriate 😂) of untested. This item takes three AA type batteries, just what does it take to pop three battery in and turn on the unit. Why am I so sceptical about this item? I just have a feeling that it’s going to be riddled with issues and I bet one of them involves battery acid.

But, miracles do some times occur, so let’s just await its arrival so I can carry out a full assessment, in the meantime here is a little bit about this game.

The 1999 Hasbro Monopoly Handheld game is a classic electronic version of the board game designed for solo or multi-player action. It features computer-controlled opponents, a virtual LCD board, and an interactive narrator (Rich Uncle Pennybags) who guides you through buying, trading, and auctioning properties.

Gameplay Features

The 1999 handheld faithfully recreated the full experience of the classic board game in a portable format. Key highlights include: 

• Computer Opponents: Play against up to 3 to 5 distinct, computer-controlled characters (like Diamond Jim or Greedy Granny), all of which operate at different skill levels.
• Full Board Mechanics: You can buy, sell, mortgage, trade, and even auction off properties.
• Audio & Visuals: Features a custom LCD display, physical buttons for menu inputs, and fun real-sound effects.
• Power Requirements: The unit typically requires 3 AA batteries to operate. 

T’internet

Assessment:

Well, my suspicions in this case are correct. It has arrived and for a unit that is now 27 years old I must admit that cosmetically it is in a good looking condition, with all labels intact, minimal marking on the screen, and all buttons appear to be clicking. All body screws are present and do not appear to have been tampered with at anytime.

But hold on, what’s that I can see through the speaker grill on the front?

I open the battery company and as I previously thought there are signs of battery contamination.

Bugger. Ok I’ll put three batteries in but I’m pretty sure I know the outcome. Yep, it doesn’t power on. The unit is dead.

An untested unit. It’s taken me 30 seconds to test and confirm the issue. Wouldn’t have hurt to be honest and to have done the same would it?

I paid £7:90GBP for this unit, it was probably the least expensive of all those available at the time, I guess I can’t complain really, I just detest people’s deliberate dishonesty. Ok, whinge over let’s open up the unit to delve a little deeper.

I open the case and can breath a slight sigh of relief. Yes there are obvious signs of battery contamination, but not as bad as previously thought. As I had seen signs of contamination in the external speaker grill, I’d thought the insides were rotten. In fact the contamination in the speaker grill was only a few grains of contamination that had broken away from the battery compartment.

The wires near to the worst points of contamination in the battery compartment were pretty much rotted and covered in old battery acid. One jumper that would complete the continuity of the battery/power flow had rotted off and one of the very thin speaker cables was also broken.

Repair:

I’ve given the mainboard a good clean with IPA and set about removing all the battery connectors from the battery box.

I’ve reattached the jumper cable with some fresh wire, I’ve trimmed the rotted wires down to some good unaffected wire and reattached these to the new battery connectors. The speaker wires are freshly soldered back into place.

With everything now connected up I put three batteries in to place and can instantly hear the computers electronic voice welcoming me to Monopoly, Rich Uncle Moneybags lives again.

Time to reassemble the unit.

So the issue was here was the result of battery contamination. Four battery contacts, and one wire, were all that were additionally required along with a lot of cleaning and some re soldering to secure some weak connections. It’s now a complete working unit.

Result:

As usual, this would have been a prime target for the tip as it’s just one of those disposable units we have created as the wonderful guardians of this little planet we reside upon. It’s taken probably about 30 minutes of time to repair (and about the same to clean internally) to bring this unit back to life. A good polish externally and it’s now ready to be put back into use.

And my chief tester for these type of items is my wife who absolutely adores the game of Monopoly.

The only real issue with these units is that they never came with an on/off switch. You had to put the batteries in and then remove them when you were finished, this is very strange. However when you read up on line you can see that many people have made modifications to put volume controls (even though there is a three press button version built in) and on/off switches on the unit. I will probably put a switch in myself when I come across a suitable one to use.

In the meantime we now have a working unit, the wife gives it her nod of approval and that’s good for me.

A simple repair, very little outlay and only a little time was all that was required to save another item from landfill. Wouldn’t it be good if we could all take the time to repair rather than dispose.

Thanks for passing by, as always it’s always very much appreciated.