Category: Photography

Nikon Coolpix L22

Circa 2010

Inspection

How the Camera looked upon arrival

Now these small digital units are well known for having faulty battery door mechanisms and this example is no different. The only real way to fix this issue is by obtaining a replacement fascia with the lock mechanism in place or source a temporary fix that will get us by. The lens seems to have an autofocus issue, again this is a common fault with these kind of units. I may dismantle the lens assembly, clean and lubricate. The electronics seem fine, a factory reset may be in order. I’ve used the strap and case from a damaged L22 to further compliment this unit. Recycle that’s the theme.

The camera was received with the information that the auto focus was not working and that the battery door was broken causing the batteries to fall out, also the batteries had to be full for the camera to work. Let’s take each issue one at a time.

The autofocus. This camera has numerous settings and one of those is smart auto that sometimes goes into “panic” and causes the unit to show errors especially as the battery starts to drain due to the camera constantly trying to focus on something that is not there. Move the setting to std autofocus and the camera is not so overwhelmed with information and is more willing to cooperate. Before I did this though I reset back to factory settings, I have then spent over an hour taking pictures of all sizes using all settings with no issues. I’m assuming the issue of autofocus was never really an issue, it’s basically back to basics as in computer terms “turn it off and on again”. After a reset of course.

Pictures good and reset carried out

Battery door. This is a known design issue with these early Coolpix cameras, I don’t know why Nikon didn’t address them back when they were produced. As these were made back in 2010 when digital cameras world wide were at their peak with something like 21 million units being produced, I suspect a recall would have cost a fortune. That said 12 years down the line it explains now why items like this have become disposable and are now ending up wrongly in landfill. The battery door has two points of contact where the door actually locks. One at the very edge of the body is the main culprit and when this goes batteries will fall out. The second catch relates to a small moveable switch in the middle of the door that has to be moved to open the battery compartment. If this alone is broken as is the one on my unit, then the battery’s will stay put temporarily until the user starts moving the camera around and then the door will pop and the batteries will exit the camera. As these catches form part of the front fascia there is really only two options available. Option one: purchase a damaged donor camera, make the repair and use the remainder as parts. Option two: Make a repair that is not particularly aesthetically pleasing but allows further use of a camera that is in all other aspects working perfectly. And we save it from landfill for a while longer keeping to this sites aims of recycling. I’m going to be looking at option two and will expand on what I intend to do later in this piece.

Broken tab middle of battery flap

Battery life. These units were ploughed out en masse before rechargeable batteries had a proved and viable existence. If you use bog standard cheap old batteries on these cameras using autofocus, flash and god knows whatever then prepare to replace those batteries quite frequently. Use batteries that have heavy duty not pound shop specials and here is why. Today I tried two brand new cheap batteries, the camera wouldn’t turn on and all I could hear was a clicking sound. I changed the batteries for two new high output ones and the camera operated fine, rather flummoxed with this I decided to get the multimeter out and have a check, the cheap batteries had a charge of just over one volt, about 30% less than expected and in theory it was dead. The better battery was holding one point five volts so in that respect it was working as it should. Moral of this story is don’t use cheap batteries on items that demand more such as photographic equipment.

Options for securing the battery door

Cheapest options, elastic band, piece of tape does the job, life extended. Hey presto! I have seen many fixes, Velcro tape – it works, small catches fitted as an afterthought- they work, they are all good ideas that extend the life of the product, an item that would normally just be flung in the bin as soon as the issue developed. The important thing here is that there is little value in this product now so don’t go over engineering things and looking at expensive solutions that will yield no long term benefits. Keep it simple and pass the solution on. Try and use items that you have around you, recycle and reuse that’s the purpose of this site.

Let’s add a nice strap and pouch from a donor camera

I like the idea of a small 3 inch metal strip and a thumb screw that fastens into the tripod hole. I may well make this up to show you what can be done, I have some plate laying around and a number of screws so that one is a starter for me. I will also look at one of the other examples mentioned above as a comparison. If I ever get around to making this I’ll update this post in the future. For the meantime why use a sledgehammer to crack a walnut, the elastic band option is more than suitable for this camera. I’m passing it onto my nephew, he’s new to photography and whilst he is deciding if he likes photography or not, why not experiment and give this little unit a few extra years of innocent experimentation 👍

Nikon Coolpix L27

Circa 2013

Inspection

Nikon Coolpix L27
Nikon Coolpix L27
Nikon Coolpix L27 case
How the camera looked on arrival

The problem with this camera is that it had a focus issue and currently it is dead electrically. Quite looking forward to getting into this one as it maybe quite a simple fix. That said, it could be that the whole internal circuit needs replacing which will mean the camera could then be added to my ever growing spare parts collection.

On receipt this camera cosmetically is in excellent condition. Even the normally broken battery door catches are in fine condition on this model. The unit is very dead though and it looks as if a battery has leaked inside causing some corrosion. I suspect some of that leakage may have travelled a little further as it seems the wide/telephoto switch on top feels a little rough when it should be a smoother movement. I’m going to have to get inside this one and have a look around.

Battery leakage evident

I’m afraid it’s disappointment with this unit. The battery leakage is so severe it has pretty much dissolved a number of components, ruined the board tracking in a number of places and corroded the wide/telephoto switch beyond use. The trusty multimeter confirms that the main circuit board is about as much use as a chocolate fire poker – useless. I’m afraid this unit is resigned to use as a spares donor for another day.

Severe corrosion from batteries evident

As you can see above, the batteries have been allowed to leak causing a catastrophic amount of damage to the circuitry. I have cleaned tested used a specific cleaning solution and scrubbed the circuit to no avail. My friendly multimeter has confirmed the circuit is beyond economical repair.

Wide/Telephoto switch totally corroded

I have stated in earlier posts that there needs to be a greater awareness of the frailties of cheap batteries. There is a particular brand I know of that has adopted the name of a large photographic company I used to work for, and to be blunt their batteries are utter crap. They start to leak very soon after their demise and the acid/alkaline leaks everywhere, they should be avoided at all costs and I very much suspect this specific case is due to such advice being ignored. High use items such as cameras require an adequate battery, please do not cut corners here as it is a false expenditure.

Damage caused by corrosive substances

The saving grace from this unit is that I have a few items that will be put to use at a later date. The body shell with its intact battery locking mechanism will probably earn me more than the whole camera cost originally and that will still leave me more as spare parts. It’s just a shame that cost cutting on the power supply has damaged so much of this unit. I cannot impress on you enough, do not use cheap batteries, you will potentially pay the price of permanent damage if you do.

I have had to seriously clean and decontaminate my work board due to the immense amount of contamination that came from this unit, I’m glad I wore protective gloves whilst attempting to clean this unit.

What I have managed to salvage

I have salvaged a complete body shell with working battery locking door, a lens focusing unit, a rear screen and holder, a number of screws, a flash unit cover and a 330v 100uf photo flash capacitor. As well as a nice leather case.

Unfortunately not every unit is salvageable, however we have parts to assure the next unit may not go to waste. A healthy spares store is always welcome and all I can say is…. Onwards and upwards, bring forward the next repair.

Vintage Camera figures

Bilora Bella

Cameras go back a good few years since the first photograph was taken back in 1826 – 1827 by Nicephore Niepce. Back then he used a bitumen substance on a pewter plate as his light sensitive base for his photo of a rooftop in France, the exposure was somewhere around 8 hours, oh how things have progressed.

I’m putting this piece together to give the reader an idea of just how many cameras were produced between then and now if I can pull sufficient data together. The issue here is that cameras took many forms, from boxes with holes punched into them through to disposable items that were popular throughout the eighties and that are now seeing a resurgence in popularity due to people wanting physical prints rather than trawling through many thousands of images they have stored on their electronic storage devices.

What defines Vintage?

Well that’s a good question. Even good old digital is classified as a vintage if you go back to the 80s and observe what was around then. Camera companies pump out version after version of cameras each one supposedly better than the last, I should imagine almost every family on the planet has an old camera of some sort in their possession, those old Kodak Brownies et al were absolutely everywhere. Truthfully I’d expect anything over 10 years old to be vintage, they are also reducing in popularity now due to the appearance of the smartphone….. as I have said previously, everyone is now a photographer.

Some figures then..

It’s pretty much impossible to compute the really old lines of cameras as there were so many brands and very little in the way of monitoring output, sales of the big brands were immense as we know, the likes of Kodak monopolised the photographic arena for decades and they absolutely flooded the markets world wide.

Digital cameras peaked in sales of 121 Million individual worldwide unit sales in 2010 deemed to be the height of camera demand pre Smartphone arrival on the scene. Since then sales worldwide have decreased to about 8 Million units a year in 2021 and continue to decline, that said there are an awful lot of units out there more than likely stuck at the back of a drawer or hidden away elsewhere within the household.

The big number is this though. According to Visual technology and investor LDV Capital the numbers of cameras around the world will have risen to at least 45 Billion by 2022. Ok, that does include the smart phone and almost 770 Million CCTV cameras as well. Think about that figure for a moment, there are currently 8 billion people on this planet and this figure equates to there being 5.5 cameras available to each and every one of them. A phenomenal number you’ll agree.

So…

The sole purpose of this page to me is just to highlight the amount of cameras out there, I want to do my little bit to repair, recycle and repurpose a small number of them but I also want to point out that there is no shortage of stock….😎

See a further post on DSLR figures: More Camera statistics

First steps

So most of my adult life I have convinced myself that despite having a hatful of interests there was nothing that I was particularly any good at. It’s strange really how you always knock yourself back if you don’t have that much confidence. In truth it really is quite the opposite. I started out in Photography way back in the days before digital when you had to get your hands wet to produce results, for me the old Silver halide era of photography cannot be matched or equalled and personally I think anyone can be a photographer these days, however give them developing tanks, print dryers developers and fixers an enlarger and then ask them to dodge and burn prints and then retouch them and the result might be slightly different. I remember days when I used to photograph weddings and shoot maybe 6-8 rolls of film, a friend of mine in the digital arena shoots maybe 2-3000 exposures per outing! Wow, she will never experience the fear of having a blank film post processing.

On top of this I’ve had an interest in electronics from an early age, I used to visit jumble sales as a kid, buy old radios and repair them and sell them on to get some pocket money. I obtained a city and guilds in electronics back in 2000 as well as an “A” class Radio Amateur qualification (M0ESB) so yes I’m a Radio amateur as well. I could have ventured into a job role utilising this however I preferred to maintain it as a hobby as I didn’t want to fall out of love with electronics.

I also enjoy arty stuff, I love painting both pictures and stuff, tarting stuff up – you know what I mean. I have recently had lessons in the Bob Ross method of painting with a local tutor and I really enjoy this. I’ve always enjoyed making models and painting them and I like building small dioramas as well so I can be quite crafty when I put my mind to it.

So to return to the start when I was searching for my worth as such, I have decided to combine a number of these hobby/experiences and I will be purchasing old unloved equipment, making it good “Tarting it up” and hopefully moving it on either for decorative purposes, for use as props or even returning it to its original purpose.

The site is new and I’ve kind of jumped the gun by getting this up and running before I have any projects on the go or even stock to use in those projects. Hey ho, that’s the way I roll is anyone else as ass about face at doing things as I am?

Hopefully I can record my progress through this site that is a new venture for me as of Feb 2023.

Maybe you as a visitor will follow my journey, maybe you will pass on through, however please feel free to feedback any constructive advice as we can all learn from that.