Latest posts

Faux stained glass painting

I’m new to this art medium, I don’t really know what I’m doing, but like everything I do on this site, I’m willing to give it a go, always willing to learn. So here we go.

I was watching a program on TV a week or so back and was watching a stained glass window being repaired. I was fascinated with the expertise and commitment these guys put into repairing these pieces of art. I thought to myself that this is something I would love to try but obviously I just don’t have the expertise, space or ability these guys have.

So I had a look around for simpler alternatives and that’s where I found out about Faux stained glass painting. It’s a whole lot easier, less expensive, and I have most of the tools required already.

I’ve attached a video of the technique that I’m interested in, this video has kind of sold the process to me.

Faux stained glass – Emily Seilhamer

I’m going to give this a go now, let’s get started.

My Subject:

I’ve chosen two simple potential templates that were free to download from the internet. As this is my first attempt I’ve chosen a couple of design templates that will be good for a first attempt at this type of art. I’ve chosen a bird and a simple flower.

The two templates I will be choosing from for my first attempt at this medium

What do I need?

Not a lot to be honest, below is the minimal requirements.

  • Craft PVA glue
  • Craft clear glue
  • Paints – I use acrylic, you can use pretty much whatever paint you have around.
  • An old cheap frame, with glass
  • Brushes, or sponge applicators, some tape and cleaning materials

And that’s basically all you need.

Ive been out and purchased some supplies including some shadow box frames that were on offer. These will be my guinea pigs for the purpose of this post.

Supplies

I’ve chosen the flower template for my first attempt as it is slightly less involved. I’ve mixed some black acrylic paint in with some PVA as this is what you use to form the black “Lead” type outline. I’ve done some samples on plain A4 paper to perfect the technique as it was coming out all blobby and runny, I think I’ve now perfected how much the nozzle needs opening and now I’m quite happy with the outcome.

Let’s go:

Next i tape the template to the rear of the frames glass, i then clean the front of the glass getting rid of finger prints and anything greasy that might stop the ink bonding to the glass.

Paint/glue applied a bit blobby

Using a steady hand you then just add the glue/paint to the top of the glass following the template underneath. Don’t worry too much if you get some blobs and bubbles, the bubbles can be burst by using a needle and the blobs can be dealt with when the solution dries, because the glue can be easily cut or peeled back. Don’t worry too much about little mistakes, just go with it. Don’t worry about making straight lines perfect as the irregularities just add to the authenticity of the piece. You don’t see perfect lines on old stained glass windows, so don’t worry. I use some small paper tortillons just to remove some small smudges and they work fine.

Now we just need to wait for the outline to dry and I’d suggest leaving this for a good eight hours or so.

Whilst I’m waiting for this one to dry I’ve done another small one with just some random geometric shapes. I love the way this one has just spread out and gained a great scruffy edged look. Can’t wait to paint it.

There are many ways to do this technique and the video at the top of the page gives yet another two ways to obtain this outcome. These are my first two attempts and I’m going to try the techniques in Emily Seilhamers videos at a later date. Meanwhile back to my two attempts.

For painting you need some clear school glue and whatever your preferred paints are. I’m using some acrylic paints as I have plenty of them around. Using a tiny spot of paint you then add some glue at a slightly greater ratio than the paint, the thinner it goes on the more translucent it will be, if thicker it will be more opaque. Don’t t worry about paint strokes, it will happen as you are painting with glue. The good thing is if you are not happy with the outcome you a can always use a craft knife and just peel the offending colour off. It’s easy.

The good thing is that this paint dries really quick and in a warm room it’s probably dry in just over one hour.

I’m quite happy with my first attempts, there are little mistakes and many things I have learned from trying this medium. I’m not going to make any changes to what I have done as I want to display them as battle scars. You know, a snapshot of what I did at the time and how I have learned from it. The next examples will be better, I have a third one of these box frames and that will incorporate all I have learned from doing these little prints. It will be just like a journey into Faux stained glass in three parts, and they will all be on display.

This project isn’t quite finished yet though, there is one other thing to do. The perfect place to display these items of course is right up against a window just the bare glass, allowing the sun to come through and show off all those lovely colours. However you can also display these pictures within frames and this finishing touch courtesy of Emily Seilhamer, completes that look.

You just need some kitchen foil. Yes you heard correctly. Kitchen foil.

Cut a piece of foil just slightly bigger than the backing cover of your frame. Now scrunch it all up but not too tightly. Just move it around in your hands until it appears to have an even amount of creasing as this is to be come your light refracting layer.

Scrunched up tin foil

Attach this to the frame back and then secure it back in the frame against the glass you have painted, trim and tidy the foil using tape at the rear of the frame.

Now turn it over

Look at the difference with the foil effect

See how that tin foil now reflects all the available light and makes your picture look totally different. The refraction appears to help cover up the brush strokes we discussed earlier, and you can now display your pictures in any area of the house, and any available light will be reflected on to and will enhance your pictures.

On the fire place

I hope you have enjoyed this post, as much as I have putting it together. Thanks as always for passing by. It’s always very much appreciated.

Peace to you all.

Mainly Victorian…but getting there.

How has technology changed your job?

Change? What’s that?

I work on the railway, in many aspects there has been a technological change especially in the development of new rolling stock and safety aspects.

However where I am in the East Midlands we still use an awful lot of Victorian technology, and yes you travel over it every day especially if you use the line that goes between Leicester and Peterborough via Melton Mowbray. Here we have signal boxes that still use Absolute block technology with the signallers using bell codes to communicate. The signalling is the Victorian semaphore signal type and the signal boxes all have large amounts of levers to pull using a wire and pulley system to activate the signals. Most of the boxes themselves are listed buildings and can’t be renovated in any way, yes some of them are getting on for 150 years old.

In my job I spend an awful lot of time on this line, I must admit it is very safe and quite reliable, however sometimes the system has issues that need attending and due to a lot of parts being widely unavailable due to the systems age, this is when the new technology gradually gets implemented. It’s taking time but as they say on the railway….

We’re getting there.

Maybe not today, or tomorrow, but who knows when.

Don’t ask me 🤷‍♂️

We’re getting there.

Have a happy and safe day.

Eh…. Not often

How often do you say “no” to things that would interfere with your goals?

Yes/No

To be honest my Mañana / Procrastination gene has gone into a higher gear in the last few years and I must admit I’m extremely indecisive as well. My goals, or the few I have had, have pretty much been achieved and I’m in a sort of “I don’t give a damn” cruise mode at the moment.

I don’t like saying no to anyone really, it’s just not me and I guess that’s probably why I find my place in society as one of those little worker ants rather than a high achiever. I could have done better, a common statement since school and throughout my adult years.

It kind of breaks me in two to use the word “No” and to be honest I can’t, hand on heart, say that the word has ever featured to as much as restrict my goals or accomplishments in life.

I’m ok, and I’m happy with my lot. Maybe I was just not brought up to say it. Maybe putting restrictions on demands and saying “Yes, but!” Draws a line in the sand instead, and that’s probably as close to the word “No” as I tend to get.

Probably why I’m so damned knackered 😴

Happy day all. Stay safe.

Build your own IONIC Plasma Thruster – NASA secret design

What I really love about technology is that there are some damned clever people out there prepared to push the boundaries. This guy on the Skill Make site took on the challenge to build a NASA inspired IONIC plasma thruster as a DIY experiment.

DIY at its finest

These guys are just way out there when it comes to tinkering. There is no way I’d even consider or even know what the hell i’d do in these situations. But I’m so glad there are people out there doing these really random way out there things that impress the hell out of me.

This is one of those situations. Enjoy.

Is Apollo 11s Lunar module still in orbit around the moon?

In 1969 Apollo 11 completed the first successful landing of the human species onto another celestial object, our moon. We all know that part of the lander is still on the moon but the section of the “Eagle” that took both Armstrong and Aldrin back up to Michael Collins orbiting above in the Columbia module, could to this day still be orbiting the moon. This video by Scott Manley explains how an amateur space fan has used online tools to predict orbits and the potential position of the discarded “Eagle” 55 years later.

Is the Eagle module still orbiting the moon?

I love articles like this, for someone who was a child of the space race era, it is still a fascinating subject to this day.

A gaming device in a tin. How quaint…

Being one of those from the Ham radio community there was always a fascination with putting a Morse code transmitter into a disused Altoids tin (Other tins are available). Here and now though we have a gaming device that can fit in the same tin. Worth visiting Git hub via the link to see the actual boards and the plans for making this a kit version. I’ve signed up, let’s wait and see what happens.

Mr. Twelftree

Who was your most influential teacher? Why?

My School was Little Reddings in Bushey Hertfordshire. In year three and for the year following this, one man became the individual who i class as being the most influential person I have ever met in my life. Even stealing that title from my own father. I’ve written of him before but because WordPress is so repetitive with its daily quotes I’ll just post a link here from a previous post from back in 2024 and 2023.

Me Twelftree – you legend

Have a wonderful day.

Todays Mantra

Simple:

Simple and straight to the point

Have a super day

Deep thinking it’s a burden, or is it?

As I wrote earlier today in this post, Strange dream I touched on the fact that I tend to overthink things, in fact I’m a full blown professional at it. And then, this post appears from the team at Anxiety unplugged project, and it has me thinking about it even more. But on a more positive level.

Excellent info as always

Not saying I’m a great mind at all, but some times it’s nice to blow smoke up your own tubes 😂

Earning on YouTube

I follow a number of channels on YouTube. It’s the only social media site apart from this one that I do get involved in. I have absolutely no intention of ever making a living on these platforms as to be honest I couldn’t really be arsed to.

Hugh tells you how it is

However a lot of individuals nowadays want to do just that and make their livings on line.

Now Hugh has a very interesting site for someone like me that likes anything from the retro era. He’s been without a smartphone for over a year and his progress without one has been really interesting to follow.

Hugh does earn from his online presence but to be honest it isn’t a living. He goes through the figures in this video that show all the hoops you have to jump through to earn a living from having an online presence.

Enjoy.