2020 – Foxes Den

For anyone who knows me, they will know only too well my fixation and fanboy devotion to the 90s music of R.E.M

I’ve been a fan from the early days, I’ve seen them live on many occasions, god I even have a tattoo of one of their album covers that I’m actually having touched up next week as it happens.

Around Christmas 2020 they released a 1000 piece jigsaw puzzle in conjunction with the ALA (American library association) of an original poster that was released in 1990 to promote reading. This poster was quite collectible at the time and still sits in many fan’s collections around the globe. For those that did not possess the original poster, this jigsaw became the next best thing.

The original advert from the Very Good Puzzle company

The puzzle sold through the groups own website and was produced by the Very Good Puzzle Company. In the UK the puzzle retailed for about £25:00GBP. I think it was purchased for me as a Christmas present from a relative.

I started the jigsaw in January 2021.

The intention from this day forward was to take a picture daily, as I set myself a target to dedicate an hour at a time towards its completion.

Beyond day four, which in itself had spanned a couple of months, time being spent on the puzzle when other commitments would allow. The puzzle became ever more difficult and confusing, as there are a number of areas within this puzzle where the areas are dark, or of just one colour and it just became a pain in the ass. So this was 2021 now, and very soon after this last picture, the jigsaw, on its base board just got put on the top of a cupboard in the spare bedroom, and there it stayed until early 2026.

For those who occasionally delve into my ramblings, you will be aware that in January 2026, after protracted selling shenanigans, we eventually moved to our new home. At this point we had packed and shifted almost everything, and the jigsaw was reluctantly broken up and put back into its original box. I guess I’d admitted defeat at this stage.

Step forward my Sister in law – Liz.

Now Liz loves Jigsaws, it’s her hobby and she heard of the ongoing issues with the R.E.M jigsaw. She has absolutely no interest in the group as such, and would probably, in her own way be quite opinionated in her views of their music, that’s her right and I respect that. She asked if she could take on the challenge to build it, and who was I to say no. So in March of 2026 I handed the box over to her.

Good luck with that Liz!

Just a few days ago Liz and her husband Terry came to visit as we were all heading out for a day. And as they came in they had a large object in a black plastic cover.

“Sit down Dave and open this” I was told, you might like it. I did what I was told and to my immense surprise, not only had Liz completed the puzzle, but her husband Terry had also framed it for me. I now have the completed puzzle, and the way it is presented looks absolutely fantastic.

Liz had spent a lot of time on the puzzle, and also shared her frustrations on the dark areas that were problematic. But the thing with Liz is once she gets her teeth into something she will never give up. And for that I am forever grateful, for she has done a fantastic job, and this will be a welcome addition to my work room, as the wife won’t let me hang it anywhere else.

So after 5 years, the puzzle is complete. And I think it looks superb. I now have my own personal copy of that poster that was so popular back in 1990.

Thanks Liz. You are a star 🌟

A peaceful day to you all.

What the listing stated:

Fujifilm Instax Mini 7+ Instant Film Camera Not Working Spare/Parts. When batteries are inserted into the machine, lots of clicking noises can be heard from the battery compartment. The camera button functions do not work and therefore I am selling this as spares and repairs.

EBay

I enjoyed my last repair on one of these cameras so much that I just had to buy another. You can read about that repair and the issues I encountered here: Instax Mini 8

Nice example. And no battery contamination

Here’s a little about this camera:

With its LED-indicating exposure meter manual exposure controls and automatic flash adjustments the MINI 7+ produces well-lit pocket-sized photographs. Easily shoot in-focus snapshots using the 0.37x real image viewfinder with target spot controls and a 60mm lens with a selfie mirror for in-frame portraits. With a shooting range of 23.6 and beyond the MINI 7+ is ideal for close-up portraits and close environments.

T’internet

I believe this camera was released around 2020 so it’s not that old. This particular unit is also missing the battery cover which is a bit of a pain in the Ass, however cheap replacements are available but not matching the cameras colour. Am I bothered? Of course I’m not, as long as it works I’ll be happy. I could even paint it up, that might be interesting.

This unit has cost me the grand total of £8:69GBP my Mini 8 project cost me £11:45GBP so I’m very happy with this price. The value may rise slightly as I will have to purchase a new battery cover.

Anyway, let’s wait for its arrival.

Assessment:

The camera has arrived and it is in good overall cosmetic condition. A bit of dirt on the back near the film counter, but this should clean off ok. There is a gaping hole where the battery cover should be, a pain yes, but I can always source a new one from somewhere.

The good news is that there is no contamination on the battery contacts, they are absolutely fine. When batteries are inserted the transport runs, but it runs too long, and then a red light shows at the end of it’s movement, and no buttons work, in theory it’s dead at this point.

A little movement of the camera and you can tell that something is rattling around inside, so something has definitely come loose or broken from within.

Let’s get it open and have a look.

Repair:

I’ve sourced a replacement battery cover however it’s in China and I’m probably not going to see it any time soon, maybe not even until next month. I’m not going to order just yet until I know if this unit is repairable. But as soon as I get an inkling that it might be repairable I’ll order it.

The replacement cover. It’s white. My camera is purple. Time to get creative.

Next I’m going to open the camera up to see what the source of the ratting sound is.

These are the items that are rattling inside once I have opened up.

One of the items i recognise is the spring that comes from the operating button, the other part is broken off of something, i will have to look through the mechanism of a donor camera i have to see if i can find a part that matches. And I’ve found it. It appears to be a film transport mechanism buried deep in the workings that had broken and become jammed.

Top, the broken piece and below the replacement part

The part is a right pain in the ass to replace, as it has to be in the absolute perfect position within all the cogs, and there is no reference to how the cogs sit. You have to reassemble most of the camera to test, then open it up again to make fine adjustments.

Capacitor sits underneath this battery housing

So far I have done this about four times, and I still have to open it and do it again. Once again I’ve managed to twice make contact with the flash charging circuit giving myself a right quick electric wallop.

A nice impression of the two flash test probe points I seem to keep touching

I have learned my lesson though and am now employing capacitor discharge probes every time i remove the batteries, as I say in the website intro pages, don’t do as I do. I’m an idiot. These capacitors maintain about 300v to power the flash, believe me it’s a very quick jolt, but it’s a painful one. You certainly know it has happened, be safe, don’t be like me.

I’m holding back on ordering the battery cover at this moment until I can confirm that the cogs and transport system are working in harmony with each other.

On my sixth attempt at lining up the cogs and transport system I believe I have it set correctly. I’ve compared the transport with another similar camera and it duplicates its workings perfectly. It operates well and there are no fault lights showing. The movement is free and unobstructed. I’m happy that the camera is now repaired so I will now go ahead and order the battery cover. The cover has cost a total of £3:12GBP including postage and that puts the total cost of this project up to £11:81GBP compared to my previous project cost for the Instax 8 of £11:45GBP, so I’m pleased with that, as costs are very similar. Oh, and I best get some more film to test it out as well. It isn’t classed as working in my eyes until I see some photographic proof.

Result:

This is my second repair of a camera in the Instax range and the most challenging to date. It’s been great to work on and as usual I have learned a lot about how these cameras work inside. I’m glad I had an old camera to call on for spares as that has proved invaluable in this case. In the past I think I just would have given up on a full repair and junked the camera as many people seem to do, however these cameras are very repairable, desired by the younger folk, and worth designating some time to as they can be saved. There are a lot of non working examples available out there at a fraction of the cost you’d pay for a new working unit. (Money to be made in my own personal point of view)

The unit has polished up very well and looks lovely.

And it works….

I’m so pleased with this camera, it’s taken a lot of time and head scratching but we got there in the end, and it is as good as new. I’m still awaiting the battery cover, and we have guests coming around today so I’m going to use this for some random photos. Just got to make sure I don’t let the batteries fall out. Once again we’ve saved another unit from landfill and that is the big win here.

Three weeks later the battery cover has arrived from China. Perfect fit.

Many thanks to my lovely missus for allowing me to take photos. Rare because she hates having photos taken.

Thanks for passing by, as always it is very much appreciated.

Tag: 2020

It’s a Puzzle..