Just back from our break away and some of us are still in the holiday mode, itchy feet the decision was made to take a short train ride out to one of the areas I patrol at work – Barrow upon Soar, a small town between Leicester and Loughborough.
Barrow-upon-Soar is a parish and large village, which gives its name to a Poor Law Union district, and a county court district. It has for ages been celebrated for its excellent limestone, and is pleasantly situated on the east side of the navigable River Soar, and on both sides of the Midland Railway on which it has a station 2 miles N. of Mount Sorrel, 3 miles S.E. of Loughborough, and 9 miles N. of Leicester. Barrow township comprises about 2510 acres of land and had 1099 inhabitants in 1801, 1638 in 1831, 1800 in 1861, and 1973 in 1871, the increase of the last ten years being ‘attributed to the opening of the limeworks.’ It is in East Goscote Hundred, but its parish comprises also the townships of Mount Sorrel North-end, Quorndon, and Woodhouse, all of which are in West Goscote Hundred. The area of the whole parish is about 9160 acres, and it had 5857 inhabitants in 1871.
Wikipedia
On the train we soon arrived after a 17 minute ride, and as always the difference between city and town is so noticeable, life is a lot more serene and uncomplicated in these small towns surrounding the city.
We tried four different pubs, had a lovely meal in one, took a nice walk on the canal, and ended up sitting beside the river soar to complete the evening. It was lovely and finished off the break away just fine. We now have the joy of a new working week to look forward to. Roll on next holiday….
My wife is a fantastic organiser. The family owes an awful lot to her as she always arranges meals and get togethers keeping us all in touch. Without her doing this I very much believe we’d all lose contact quite rapidly. She keeps the family together. And she is brilliant at what she does.
Today is one of those days, Easter Saturday, she has hired the Skittle alley at our local pub and we are all meeting there for a meal prior to throwing our “Cheeses” at the skittles. No perfectly round balls here, these are good old solid wood, full of splinters and shaped more like tin cans to be honest. And they can go off in any direction, there is no way to control them. Just don’t get in their way!
We play it differently up here in the East Midlands as can be seen here:
In the East Midlands, people play Long Alley in which the projectiles are rough balls or small capsule shaped logs called “cheeses” and a score is only made if the cheeses bounce a single time just in front of the pins.
Wikipedia
It can be quite brutal. But that’s how we roll in the East Midlands 😂
Our local
It’s a beautiful old pub, and we kind of adopted it when we moved up here. A right old traditional pub. I think there is about 22 of us up there tonight from all different areas, so it should be a nice evening.
Tomorrow is a different story when we will all be off to watch our home football team get slaughtered at home to our visitors- Liverpool.
But let’s not get too depressed about that, here’s how today has gone instead.
Paul wins the skittles
Winner and his prize.
4 rounds of 3 cheeses each and we had sorted out the final four of the contest, cousin Paul wins outright and wins the first prize a Cadbury crème egg. Highest score of the evening went to niece Julie who managed to down eight skittles in one round.
Overall winner Paul, and high scorer Julie.
The remainder of the evening was just people talking and catching up. It was a lovely day and My wife has already sorted out the Christmas party dinner. She’s so damned organised.
The day started at our house earlier when everyone went down our garden pub to play darts, have a drink and kick the day off in a really fun and friendly fashion. It’s ended around 12 hours later when the tiredness sets in and people start to make their excuses and gradually filter off into the night.
In the bar, after.
Tomorrow we go again when we meet at my nieces home for her house warming party. It’ll be a little more subdued as some are back to work on Monday, however I’m really looking forward to meeting up with them all again.
If you had the power to change one law, what would it be and why?
I’m going to inject a little humour into this prompt and I’ll tell you why. People see prompts such as this and then go into full dive mode to dig out a law that they disagree with, some rightly so others just because they have fallen foul maybe, and the rest just because it doesn’t fit with how they think it should be.
And then the arguments begin.
Here in the Uk and probably in a lot of other countries around the world, we have a whole load of laws still in place going back to times long past. It’s just like that drawer full of junk you have at home, no one ever has the time to open it up and get rid of all the clutter.
British law is sometimes just like that.
I’m not going to suggest any changes to the law, I’m just going to highlight a small selection of the weird and wonderful ones still in force today.
Here are a few that made me smile. They are still on the statute books, however i suspect they are rarely acted upon these days.
It’s illegal to linger after a funeral – A chap buried his wife in 2015 and waited an extra 20 minutes after the funeral as he was in no rush to leave. He ended up with a £160 fine! Apparently the law is there to stop gravediggers being prevented from doing their work
It’s an offence to handle a Salmon and look suspicious – WTF! See what i mean about strange laws. Under section 32 of the Salmon act 1986 this covers the suspicious handling of fish, and was aimed at preventing people selling fish through illegal means.
It’s illegal to be drunk in a pub – well I’m a convicted felon if this is the case. I must admit i have managed to get away with being arrested for many years now so i suspect this is one of those laws that are pretty much defunct now. The law that covers this is the Metropolitan act of 1839.
It’s an offence to be drunk in charge of a cow – the licensing act of 1872 forbids anyone to be in charge of a cow in an intoxicated state on any highway. (I have not been found guilty of this yet, Cows are hard to find in the city)
And the list could go on and on, there are literally hundreds of these old outdated laws still on the statute books today.
But i doubt anyone really falls foul of them nowadays.
Hope this shaped your wonderful faces into a smile…
VINTAGE COMPUTER BATTLESHIP MB ELECTRONICS GAME FOR SPARES / REPAIRS APPEARS TO BE COMPLETE BUT THE GAME IS NOT WORKING WHEN TESTED WITH BATTERIES HENCE BEING SOLD FOR SPARES / REPAIRS
Ebay
And here’s some info around it:
In 1977, Milton Bradley released a computerized Electronic Battleship, a pioneering microprocessor-based toy, capable of generating various sounds. Electronic Battleship was designed by Dennis Wyman and Bing McCoy.
Wikipedia
Now this is another toy from my childhood that I had envy over. This game is the one that coined the phrase, “ You sank my Battleship” as seen on many TV ads towards the end of the 70s. This time my nephew was brought one of these games for his birthday back in the late 70s when I was about 12 years old. I’ll be able to give a more accurate date of the unit when I get to see the main board inside. I suspect I’m looking at something around the 1979 timeline. Man this toy was the bees knees, again early computer technology at its finest. Here I am approaching the sixth decade of my life and I’m having another menopausal moment just as I did in this post a few months back: Big Trak CE3962 restoration
Computer Battleship
This is going to go in the games box in our garden pub / Man cave. I’m confident I’m going to get it working. I’m not too bothered if there are any small parts missing as there seems to be plenty of spare parts available online.
Let’s have a look at what has turned up.
Original boxOriginal packaging
Well I’m impressed. This game is in its original box with original packaging and is in pristine condition. It comes with the original instruction manual and all parts listed in the contents section are there. In fact there are more of the red and white pegs than required so to be honest it looks as if I have bagged a bargain here.
I’ve paid a grand total of £19:96 GBP for this game and that includes the postage, by far the best price that was on offer for any similar advertised games that I could see at the moment of purchase. Considering this game is now somewhere between 45-47 years old, a bargain you might say, if I can get it working.
I’m thinking that all the capacitors on this board as a matter of good practice should be removed and replaced. Let’s face it they are almost the same age as me, could fail at anytime (if they haven’t already) and are as cheap as chips so what’s the point of just replacing a singular one when there are only two of them on the board. I think I will do this, test them all and report back.
I know that this unit is a 70s creation but it is interesting to get some facts on capacitors and problems that they have caused over the years, especially during the 90s and early 2000s. See this old post on capacitor plague: Capacitor plague
Board removed One side of board
I have removed the board and there seems to have been some pre work done where all the wires are relayed through a connector block. This was a dangerous situation as the work that had been done diverted both negative and positive leads through this dodgy connector to the negative side of the board, causing a short that caused the batteries to heat up to a point where I thought they were going to explode as they were so hot. You may as well of just connected the two batteries together…childish mistake. I was testing for voltages and was suspicious that I was getting no readings, just as well I went straight to the battery when I did. Lesson learned for me.
Bad wiring
I have checked the speaker is working, this is a 32ohm speaker and it was indicating 31ohm so there were no issues there. I have removed the two capacitors and checked them and they are both within tolerance, hence I will leave these in place.
Speaker is fine
The batteries are separately wired on this board. The two negative wires go to the negative side and the positive wires go to the positive side, straight forward wiring, I don’t know why the previous clown wired it as he did. These four wires now soldered in place with new leads and connections allow me to attach the batteries and check voltages, all is good and reading as it should.
New leads made
I clean all the switches with contact cleaner, I clean the board with IPA and clean all the contacts. A good suction and polish of the frame and all is good.
I can confirm the board indicates that this unit is week 24 of 1979 as per the writing on the main board. That puts this particular unit at 45 years old. Will it work.
Hell yeah it does!
Main switch into the on position and the annoying sonar sound kicks in, my dog leaves the room as it’s annoying him, to me I have just been transported back to my childhood. It’s brilliant.
I collar the wife into a game, I have to teach her how to program it and it works perfectly. Every sound is there, it’s noisy repetitive and computer programming at its absolute most basic level. And it’s mine.
Computer Battleship – It works
It’s going down our garden pub to be used by the youngsters and adults alike. I think the kids will love it due to its primitive technology. They’ll learn from it.
Another piece of my past saved from landfill, and it will be put to good use. Just don’t trust any mods or fixes done by others, don’t inherit a fire risk. Check check check.
This is a handy karaoke cassette player released by Epson over 30 years ago in Japan. The item it self does not function. Recommended for retro collectors
Ebay
Mamekara Karaoke machine
This video sums it up, apologies to those with sensitive hearing:
The pub singer
Anyway, enough of the frivolities, let’s see what’s wrong and try to fix it.
On initial examination, everything seems to be there, no damage to the shell. Four AA batteries inserted and I do hear some feedback from the mic.
Four AA batteries
There are some volume controls that control the tape sound versus mic sound, there is also a speech on and off switch along with a balance control, these seem to work intermittently and I suspect they might just need contacts cleaning.
All works but needs contacts cleaning More controls that need cleaning
The tape seems to sort of work but the play button does not stay on, the recorded sound is slow. Echo and balance buttons also seem to work but again probably need contacts cleaning. I suspect the belt of the cassette needs replacing and the tape heads will need cleaning.
Cassette runs slow
Good news is that for once there is no corrosion on the battery contacts.
I will now have to open the unit up to observe closer.
Once inside there are a couple of issues that show straight away. The two drive belts are very loose and will require replacing, luckily I have a bag full of these that should do the job. There is also a wire detached that controls the motor, this will need re attaching at both ends.
Two loose drive beltsThe red wire inside the circle needed re soldering Little red wire in place
I’ve reattached the wire and replaced the two drive belts. I’ve checked the board and found what looks like a burnt capacitor, but checks confirm there is no issue. Looks like the component has a small burn on it as a result of an earlier soldering attempt, probably during manufacture.
The main issue is that the play button will not engage. I spent a good 30 minutes scratching my head here until I spent some time clicking the buttons that worked and the stop button. There is a catch on the rear of the tape head that should click into the sliding stop mechanism when depressed, this was not quite making the full range of travel. A pair of pinch nose pliers and a slight adjustment of about 1mm ensured we were now working. I was worried I might over stress this catch, however it was made of steel and I had nothing to worry about. See the video below:
Loose belts and non engaging play button
There was nothing wrong with any of the volume controls or switches, so I used some contact cleaning spray and vigorously operated them for a minute or so each. This worked just fine.
I then reassembled the unit, put in some batteries and hey presto, good loud clean sound. I put a tape in and it played just fine, probably better than some of the Walkmans I’ve fixed lately.
Excuse the pub singing
I’ve put a little video up above of me singing into it, I haven’t played a tape due to copyright issues that might occur. I’ve sent the video to the family of me singing with a tape and they are suitably bemused, the unit now sits in our garden pub awaiting more customers, once I get a few Karaoke tapes to use.
Fully working in our garden pub.
The only thing I’m going to do is replace the foam mic cover, I’ve managed to source one and that should be here shortly. I’ve also found some cheap old Karaoke tapes that I’ll store in the pub for the families entertainment.
I’ve really enjoyed this little project, and once again I’ve salvaged another item that was broken from the 90s and saved it from landfill. It lives on.
I’m starting to ask why I even chose the name. To be honest I’m from the East Midlands of the Uk and Foxes are rampant around this area, I support a football team who are known as the Foxes (Don’t hold that against me 😂) and to top it all during lock down we built a pub in our garden that is also called the Foxes Den.
Our garden pub with the same overused name..
As I have very little creativity in thinking up suitable names I tend to stick to what I’m familiar with, looking at the number of Foxes Den sites on the web though I think the chances of me getting noticed are next to zero. Lesson of the day guys is to do your research before you take the leap, don’t just jump in gung ho like I did. The word idiot comes to mind ….
Foxes Den 
You must be logged in to post a comment.