recycling – Page 3

Roberts Blutune T2 breakdown and fault finding

The radio has been received see here: Not just Dead….Fully dead and if I can’t get it going, I have at least brought a very tidy storage box.

What surprised me when first opening up this radio was the immense amount of boards and circuitry inside, I must admit I took a gulp at this and questioned my reasoning for purchasing the item. However it’s all a learning curve and I have to start somewhere, gone are the days of simple circuits on traditional radios (with big components).

I arrived home from work and sat myself down in the conservatory surrounded by test devices for about 4 hrs until I totally overloaded my self with information, creating more questions than answers, i decided to give up for the day and further research the potential faults for this unit via other sources.

To me the power board seems fine, power is going where it should, there appears to be no short circuits or component damage however in places there does seem to be some signs of leakage so I may have some components that need replacing or maybe it’s just remnants of flux and stuff left behind after initial construction.

None of this can be seen by the naked eye but it becomes apparent after being placed under my new toy an Andonstar microscope viewer. It’s at the entry end of the range but it is already becoming a game changer for me, due to my failing eyesight.

Copyright Andonstar

Further investigation appears to highlight an inherent issue with this range of radios when they just seem to stop working (probably why Roberts ceased production).

Generally the power board isn’t an issue, it all focuses around the display board where a controller to the screen has failed or the amplifier chip has failed, hooray I say! And then I find out both components are about the size of a grain of rice… Boo I say.

I have no experience at all in components this minuscule in size, but if I can’t get to the root cause and eliminate all other possibilities I will give it a go. In the meantime fault finding will go on between other jobs and this will continue to be a job in progress that will be revisited and updated as time goes by.

The plan short term is that I’m going to borrow a thermal camera and check if there are any hotspots under electrical load. You never know I might just find something.

I shall comeback to this project at a later date.

Thanks for passing by. Stay safe, be superb. You’re a star 🌟

Not just Dead….Fully dead

I have just brought this inoperative Roberts Dab Blutune T2 digital radio off of EBay for £8 (GBP). I managed to barter the price down a bit from £12 and I was quite pleased with myself for doing that.

So today I have received the package. A lovely little item cosmetically in good condition with the only external damage being that the speaker cover has a tiny tear in it , and the very tip of the aerial is broken along with the plastic stop that secures it when in the down position….no real issue, all easily dealt with.

The concern is the label on the top of the unit. Fully Dead!

So what’s that then? Is there an in between? Some sort of purgatory for audio systems, or is it a way of saying that someone has ensured it will never work again?

Well, I’ll get the back off tomorrow and have a rummage to see what’s in store for me. Maybe my bartering of the price has meant the seller has removed all internal contents so that I now have a nice “Empty box”.

I just love some of these descriptions sellers use, makes me giggle and wonder what was going through their minds when they decided to sell an item that is fully dead.

Maybe there is just different grades of death that I was just not aware of.

You can find the assessment and repair attempt here: Roberts Blutune T2 breakdown and fault finding

Anyway, thanks for passing by, be safe, be happy.

Bilora Radix 56 – breakdown

The Bilora Radix 56 camera circa 1950 has arrived today and the condition is for once very close to the original description that I read on line prior to purchase. Makes a pleasant change to be honest. No big surprises this time.

I’ve broken the whole camera down to its smallest parts, I love to do this as it gives a good insight into how the camera was originally put together. It’s lovely to see some good old mechanics instead of a plethora of electronic components. Only one piece of wire on this camera and that’s to the flash synch on the side of the body.

I’m going to clean the winding mechanism, get rid of the old oil deposits and re lubricate. I’ll also do this with the workings on the base of the camera that allow only one of two available exposure settings. That’s a “B” exposure or an auto exposure of 1/50-1/60 of a second. Not much use with the faster films that are available today. Focal length of the lens is 38mm 5.6 – 16.

The shutter works fine, I’ll probably maintain that with some graphite when I’m in there, the lens seems free of fungus but I will dismantle this anyway to clean the optics within.

There is rust on the backplate, and this will need removing, I’m planning on sanding this down priming and repainting and a new skin will be put on the body. There are only 4 small pieces on this camera so this shouldn’t be an issue. Some lubrication, spotting and a good Polish will then hopefully complete this refurbishment.

I’m considering purchasing a second Karat cassette so I can sell this on as a complete camera. I may even try it out myself someday with a small length of black and white film.

Pop on back to see a post for each stage of the refurbishment.

Thanks for visiting, you know it is much appreciated. Thank you.

Bilora Radix 56

In my search for the unusual have come across this fine specimen that I have purchased for less than the price of a fish and chip dinner.

Remember the battle between manufacturers back in the days of Betamax and VHS? Well this is the film makers battle between Agfa and Kodak, with Kodaks 35mm winning out. The Agfa cassette (known as Karat) was 35mm without the spool and you needed two cassettes to use these cameras. I have one here and hope to be able to use it at sometime.

I like this example as the metal is not too pitted. There is rust but I can work on this, the covers are damaged but this can be replaced. I might go for a totally over the top refurbishment or may keep it as close to original as possible. I’ll make that decision once I can check the optics and shutter.

You can find out more about these cameras at the following link: Camera wiki .org

Thanks for passing by, always appreciated 👍

Minolta Dynax 5000i – Phoenix from the flames

It lives, it lives!

Phew, the donor camera arrived costing me the grand total of £3 sterling. It was badly damaged and I was doubtful that it would be any use due to its state.

However the pcb area and the lcd screen looked ok and after much cursing and burning of the fingers whilst de soldering and re soldering I put the battery in and there it appeared as if by magic…all clicked and clunked as it should and the battery indicator appeared on the screen.

I put the case back together and secured all the buttons to the frame and then connected the lens. Turned it all back on and hey presto all working fine. Focus’s well, flash works as it should, all counters and indicators doing what they should.

I’m happy with this camera now, just going to give it a wipe over and I now have a super little SLR for my collection. Will run a film through it when I get the time.

I can now say this camera is complete and in perfect working order.

Job done👍

(As an aside to this repair, the original owner was so surprised I got it working that he has asked if he can buy it back? That would be rather cheeky of me so I’ve just asked him to refund the cost of the battery and the damaged donor camera. He wants to get back into analogue photography, everyone’s a winner here, and a camera destined for the bin gets a new lease of life.) I’m happy 😃 👍

Minolta Dynax 5000i – Dead in the water

Well that’s annoying. I’ve stripped down the Dynax 5000i and found a terminal diagnosis for the power PCB and display screen.

There is a short circuit, severe corrosion from an old battery as well as the display screen being damaged where some of the fine contacts are destroyed rendering the unit useless at this stage.

Ok. I can strip down to individual parts, gain another 150 or so new screws and some parts that I may be able to use or sell on – or I can be a total numpty. I’ve decided to head down the numpty route and purchase a donor camera to repair this one. I’ll still get a load of spare screws following this route.

I’ve purchased a unit, it has cost me next to nothing and fingers crossed I can get one of them working and gain some spare parts for future use. I didn’t really want to pay out more but I take issues like this as a challenge and I’m committed to get this up and running.

My wife calls me gullible, what would she know bless her 😂

I’ll let you know exactly what arrives when the postman pays a visit.

Stay safe 👍

Bilora Bella 44 – 127 – Now Complete

I have been waiting for some leatherette to complete this camera. I had some left over from my last project so why not use it here?

This is a lovely looking camera that I fell instantly in love with, great design made of tin pot metal basically and uses old 127 film.

It has been completely stripped down and rebuilt and is a lovely specimen in my eyes.

I have today made templates for the new skin and these have gone on lovely.

So for now I’ve done all I can do on this little beauty, it will now be vacuum packed with silica gel and put into my collection for use at a later date maybe when I get a roll of 127 film. Been a pleasure working on this camera, she’s taught me plenty and I am already putting that to use. Knowledge is king 👑

Now I’ve reached a point that I can now say, time to wrap this job up and put it to bed.

Job done 👍

Minolta Dynax 5000i – Not working

If you remember back a couple of weeks I had this camera given to me by a family member. Not used in about 20 yrs still had a film in it as far as they were aware there were no issues with it.

I beg to differ…..

In lay man’s terms I think the term that should have been used is that it’s knackered (not working, kaputt a non existent camera)

I purchased a new 2CR5 6v Lithium battery from a well known supplier named after a rain forest. Motor buzzed, but no display or any other operation was available, first thought was to test the battery was not a dud, using the multimeter I proved this was not the case compared to the old battery.

So. What to do?

General census of opinion is to ditch this as mass produced tat and get another one on eBay for a couple of quid, the electronics are a known issue for many models of cameras from the 80s.

However, this site is not about just dump and run, I’m going to dig in and look to see if I can remedy the problem. I like a good electronic problem and hopefully I can sort this. If not, I’ll recycle the parts I’m definitely not throwing it away.

It’s a learning opportunity, and knowledge is king.

Thanks for passing by. You know it’s always appreciated 👍

Minolta Dynax 5000i

Found this on my doorstep when I arrived home from work today. After making some enquiries it transpires that a family member donated it to me as they haven’t used it in about 20 yrs. Knowing that I mess with cameras at the cheaper end of the spectrum he thought that I may find a use for it. I have gratefully accepted this gift.

After speaking with the donor he doesn’t remember there being any issues with it, he wasn’t aware there is already a film in it so I will process this for him and see what if anything comes of it.

This camera was circa 1989 and was a strange beast in that the programmable modes we take for granted on SLR cameras today, had to be purchased as individual plug in cards for this camera. I guess was kind of like VHS versus Betamax back in the day and as things developed in the market I guess Minolta put this idea back to bed as a non starter.

This camera looks in great condition apart from wear and tear dust/dirt and initial checks of the lens show no evidence of fungal damage, the camera does not have that musty smell associated with age so I can only presume it has been stored correctly.

These cameras also work off a 6v lithium battery the 2CR5. Still available it retails for around £6-8 gbp. Again Minolta could have used a rechargeable but this was probably just at the beginning of that technology becoming widely available.

Information regarding this camera can be found here Minolta Dynax 5000i courtesy of Camerawiki.org

So, apparently these cameras are popular in the Lomography world. I’m going to give it a good clean/overhaul get a new battery and run a film through it to test. Not a lot to do so hopefully I’ll fit it in somewhere along the line soon. Keep checking back to see how things progress.

Thanks for passing by, always appreciated 👍

New old stock 📸

I’ve obtained three new (old) cameras this week to work on. And of the many thousands out there I think I have three lovely examples of good everyday cameras circa 1940-1965.

Halina Paulette, Braun Paxette and an Ensign Ful-Vue

Two of these cameras are 35mm and the Ensign is a 120 film camera. The Ensign needs a refurb and I will dedicate a page to the work that needs to be done on this unit. Fingers crossed the work on the other two cameras will be minimal, hopefully just a clean up however I will assess all cameras when they arrive.

I’ve never had any dealings with these cameras before so I’m kind of looking forward to putting some time in on them.

I think the above two 35mm cameras are little beauties, they have so much character and show the magnificent design ideas of their time. I’m hoping to put film through all three of these cameras that I will develop and scan at home. Fingers crossed as I said earlier that there is not too much wrong with them all.

I’ll update the site with a blog and a small video for each one once work to restore them begins.

Thanks for passing by…

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this:

Rate this:

Share this: